WORK PREPARATION AND USE:
Before operation
Warning
!
Before plugging in, check that the rated mains voltage and mains frequency,
as stated on the rating label, match with your power supply.
On/Off switch, continuous activation
•
Always guide the machine with both hands.
•
The machine must not be allowed to draw in additional dust and shavings. When
switching the machine on and off, keep it away from dust deposits.
•
After switching off the machine, only place it down when the motor has come to a
standstill.
•
ln continuous operation, the machine continues running
if it is forced out of your hands. Therefore, always hold the machine using the handles
provided, stand in a safe position and concentrate.
Switching on/Continuous activation:
Push sliding switch (1) forward, For continuous activation, now tilt downwards until it engages.
Switching off:
Press the rear end of the slide switch (1) and release,
Setting belt speed
The belt speed can be preset via the setting wheel (2)and is infinitely variable.
Positions 1 - 6 correspond approximately to the following belt speeds:
Setting
Speed
1.
2.
3.
4.
5.
6.
2,9 m/s
3,9 m/s
5 m/s
6 m/s
7,2 m/s
8,3 m/s
Sanding belt replacement
•
Release the tensioner arm (S) and remove the sanding belt (6).
•
Place the new sanding belt on the rollers such that its direction of circulation (arrows
on the inside ofthe sanding belt) matches the arrow (8) on the gearbox.
•
Release the tensioner arm (S).
•
Ensure that the sanding belt is completely on the rollers.
Summary of Contents for XT105340
Page 8: ...Sch matick pohled...
