4.
Hot parts of the tool shall be kept away from flammable objects.
5.
Do not operate the tool when in areas with aggressive gases,
flammable liquids and explosives.
6.
Disconnect the cord from the power supply after finishing the operation.
7.
After your operating, place the tool in the stand holder and let cool.
8.
Heat may get in contact with materials which may be out of sight, be
careful!
9.
The welding process shall not be repeated on the material joint if
resulting in an exposure of parts under voltage. The thermoplastic pipe
welder parts using low voltage exceeding 12V are considered under
voltage as well.
10.
Repairs shall be carried out by authorized individuals only.
5. Parts and controls
1.
Handle
2.
Voltage indicator
3.
Thermal insulation cover
4.
Heating pipe
5.
Matrix
6.
Stand holder
7.
Switch (regulation button)
8.
Cable
9.
Thermostat indicator
6. Marks and piktograms
9
8
