XTline XT102877, Original Instruction Manual, Page: 83 / 88

• Always keep your hands and fingers a safe distance from the blade of the attachments.
•
Avoid using the device in extreme heat and always consider your physical condition before
starting the device. Do not use the device if you feel tired or have problems working with
the device safely.
INSTRUCTIONS FOR GRASS SHEARS
A) Hold the device firmly with one hand by the handle so that the bottom of the device rests
flat on the ground. Slowly move the device forward.
B) When trimming around curbs, fences or trees, move the tool along these obstacles. Be
careful not to let the attachment blade come into contact with them.
C) When cutting grass or leaves of small trees, cut in several steps, not in one stroke.
D) Before using this tool, trim large branches to the desired height using suitable pruning tool.
CAUTION!
• Do not use the tool in a way that causes the motor to stop or run extremely slowly.
•
Do not attempt to cut thick branches and woody parts of plants.
•
Do not allow the blade of the shears to touch the ground during operation. This will dull the
blade, causing poor device performance.
•
Do not cut wet grass or branches and leaves of mature trees.
CUTTING FULLY-GROWN GRASS
Don't try to cut long grass in one stroke. Instead, mow the lawn in increments. Skip a day or two
between mowing until the lawn is evenly shortened.
CAUTION!
•
Cutting overgrown grass to a short
length in one stroke can cause
damage to the equipment and also
have a bad effect on the healthy
growth of the grass.
INSTRUCTIONS FOR HEDGE TRIMMER
CAUTION!
• Be careful not to accidentally touch a metal fence or other hard objects with the blade while
trimming. Blades can quickly dull, damage, break or cause injury.
• Make sure that the trimmer do not come into contact with the ground. The tool may be at
risk of kicking back and causing injury.