XTline XT102877, Original Instruction Manual, Page: 81 / 88

GRASS SHEARS - INSTALLATION
A) Insert the grass shears into the body of the device so that the hole in the base of the shears
is aligned with the shaft in the mechanism of the device.
1. Hole in the base of the shears
2. Shaft
B) Push the base of the grass shears with a slight pressure so that it is firmly seated in the
body of the device as far as possible. Make sure that the shears are properly inserted in
the body of the device and that they fit tightly around their circumference.
C) Align the recess on the bottom cover with the grooves in the device body and slide the
cover into its original position. Push the cover back in with just enough pressure until it
locks into place and you hear a distinct "click" sound.
1. Bottom cover
2. Grooves in the device body
D) Remove the blade guard and then turn on the device and test that it is working properly.
CAUTION!
•
Never use the device without the bottom cover properly attached.