XTline XT102805 Original Instruction Manual Download Page 68

fire or temperature higher than 130 °C may 

result in explosion. 

g) Follow all charging instructions and do not

charge the battery pack outside the

recommended temperature range stated by

this manual. Incorrect charging procedure

may cause the battery pack malfunction and

increase the risk of fire.

4.5 Service and responsibility 

a) Service of your tool may be carried out only

by a qualified worker specified  by the tool

supplier with the use of original spare parts

only. This would guarantee the safe tool

operation.

b) In case the tool needs to be serviced, make

sure to use only original  spare parts and

follow all instructions stated in this manual in

section “Cleaning and Maintenance”. Use of

any other but original spare parts and failing

to follow the instructions may cause an

electric shock injury.

On 1

st

 January 2014, Act No. 89/2012 Coll.

The company XTline s.r.o.  in accordance

with this law, provides liability for defects for

a period of 24 months (for legal entities 12

months). Complaints will be assessed by our 

Complaints Department (see below) and

recognized will be repaired free of charge by

Xtline s.r.o. To place the complaint, contact

the seller from whom the goods were

purchased.  Complaints, including the

elimination of defects, must be settled

without undue delay, no later than 30 days

from the date of the complaint, unless the

seller and the buyer agree otherwise.  The

buyer can file a complaint in person or by

sending the goods for complaint by the

transport service at his own expense, in

secured packaging.

The shipment shall contain the claimed

product, purchase  documents, detailed

description of the defect and contact details

(return address, telephone).  Defects that

can be removed will be repaired within the

statutory period of 30 days (the period can

be extended by mutual agreement).  After

the discovery of a hidden material defect

within 6 months from the date of sale, which

cannot be repaired, the product will be

replaced with a new one (defects that

existed when the goods were taken over, not

caused by improper use or wear).  A

reasonable discount from the purchase

price can be applied to irreparable defects

and defects that the buyer is able to repair

themselves.  On the other hand, the right to 

make a complaint expires if: 

The product has been used in

conditions or for purposes other than

intended, or by using non-original

spare parts, unsuitable or poor-quality

lubricants, etc.

The product has been damaged by

external mechanical, thermal or

chemical influences.

The device has been damaged by

improper storage or handling.

The product has been used beyond

the permissible load.

The warranty does not apply for 

accessories! 

4.6 Safety instructions for batteries 

a) Before using the battery pack, pay extra

attention to all safety instructions and

pictograms as well as the tool it is supposed

to power.

b) Do not to attempt to disassemble or alter the

battery pack in any way.

c) In case the battery pack work time gets

reduced significantly, remove it from the

power tool immediately. It can lead to the

battery pack overheating and possible skin

burn or explosion.

d) In case the electrolyte gets in contact with your

eyes, wash with clean water and seek the

medical help immediately. There is a risk of

eyesight damage.

e) Do not store the power tool and battery pack

at places where the ambient temperature can

exceed 50 °C (122 °F).

f) Do not attempt to burn the battery pack. Not

even if it is severely damaged or fully worn out.

The battery may explode upon contact with

fire.

g) Avoid letting the battery pack fall down or any

other mechanical damage.

h) Do not use a damaged battery pack.

i) Refrain the short circuit of the battery:

Do not touch the battery terminals.

Avoid storing battery pack in the same

container with other metal objects,

such as nails, coins, etc.

Do not expose the battery pack to

water or rain. Battery short circuit can

cause a large flow of electric current,

overheating, skin burns or tool

damage.

j) Li-ion batteries are a subject of legislation

concerning specific request for disposal of

potentially dangerous products. It is

necessary to follow special packaging and

Summary of Contents for XT102805


















































































Reviews: