6. FUNCTIONAL DESCRIPTION
WORK MODE ADJUSTMENT
The action mode selector (
3
) is used to switch between SCREWING, DRILLING and HAMMER
DRILLING. The arrow at the top of the device indicates which of the three given operating modes
is currently set.
TORQUE SELECTOR ADJUSTMENT
The torque selector ring (
2
) is used to set the torque value when tightening and loosening the
screws or bolts. Possibility to set the values within the positions 1–24.
SPEED ADJUSTMENT
The speed selector (
4
) can be used to adjust the speed setting by selecting between two values.
The visible value applies to the current set.
DIRECTION OF ROTATION SWITCH
The direction of rotation selector (
6
) is used to adjust the direction of rotation of the chuck to the
left or right as well as to lock the main trigger.
WORK LED LIGHT
The LED work light (
8
) is located at the bottom of the device directly under the handle and serves
for better lighting of the work area.
TRIGGER
The main trigger (
5
) is the basic control element of the device and regulates the speed.
CHUCK
The chuck (
1
) and its inner jaws are used for
clamping work tools and accessories
HANDLE
The ergonomic, rubberized handle (
7
) serves for
a firm grip of the device.
BUCKLE
The hanging clip (
11
) located on the side of the
drill is used for hanging the tool on the belt.
VENTILATION SLOTS
The ventilation slots (
12
) on the side of the
device are used for proper cooling of the motor.
Summary of Contents for XT102805
