11
ASSEMBLY STEP 5
1. Install the
CONSOLE SUPPORT (5)
onto the
UPRIGHTS (L,R)(4,3)
with the 4
BUTTON HEAD SOCKET BOLTS (87)
and 4
CURVED
WASHERS (88)
by using the
ALLEN WRENCH.
HARDWARE
HARDWARE
Bolt (87)
Qty: 4
Curved
Washer (88)
Qty: 4
NOTE: Be careful not to pinch the computer cables when
attaching the console.
NOTE: Please tighten all screws after assembly is complete.
Note: Once your treadmill is fully assembled, be sure to check the belt lubrication before initial
use by completing the following steps:
1. Ensure that your machine is off, and that the power cord is unplugged to minimize risk of
injury.
2. Use one hand to hold the treadmill belt up just enough so you can use your other hand
reach between the belt and deck to verify that lubrication is present.
If lubrication is present, you may continual normal use. If lubrication is not present, please
follow the steps on page 16 to lubricate your treadmill belt using approved treadmill belt
lubricant.
