6
SB2.5 Recumbent Bike
Handlebars, Pedals & Stabilizer Tubes
2
Hardware Step 2
#32
. 5/16” x 3/4”
Button Head Socket
Bolt (8 pcs)
#33
. 5/16”
Flat Washer (4 pcs)
#35
. 5/16”
Split Washer (4 pcs)
1. Use the M5 Allen Wrench (
68
) to secure the front and rear stabilizers (
5
&
6
) on the mounting brackets with four Button Head Socket Bolts (
32
),
four split washers (
35
), and four flat washers (
33
).
2. Use 14/15mm Wrench (
69
) to tighten the pedals (
15
left and right) to
the crank axle. The left pedal is a reverse thread and will screw in a
counterclockwise direction. The pedals are marked with an R or L on
the end of the threaded pedal axle. Make sure to tighten the pedals
firmly or a clicking noise can occur during pedaling. It may be
necessary to retighten the pedals after use, if clicking occurs.
3. Attach the left and right handles (
100
,
101
) to the Console Mast (
2
) with
four Button Head Socket Bolts (
32
) using the Combination M5 Allen
Wrench & Phillips Head Screw Driver (
68
).
