16
MB500 Indoor Cycle
No Display on Console
1. Hold down any key to bring the console to “Quick Start” mode.
2. Ensure that the batteries are installed properly in the console and transmitter. If they
are, install fresh batteries.
Cadence number jumps high or low
1. Separate bikes that may be set to the same console code and are cross-talking, or
re-synchronize the transmitter and console (see page 7).
2. Relocate the bike to a different part of the room, away from any RF interference areas.
CAUTION!!
EXTERNAL INTERFERENCE MAY BE CAUSED BY OTHER ELECTRONIC DEVICES, SUCH AS: NEAR-
BY TELEVISIONS, STEREO EQUIPMENT, SPEAKERS, ELECTRICAL WIRE CABLING, ETC. IF YOU
EXPERIENCE DISTURBANCES IN THE CONSOLE DISPLAY TRY MOVING YOUR BIKE(S) AWAY FROM
POTENTIAL RF INTERFERENCE AREAS.
Maintenance Guidelines
Maintenance Schedule
1. Use of lubricants or cleaning solutions other than those so specified will result in
diminished performance and a shorter life span for that part.
PART
RECOMMENDED ACTION FREQUENCY
CLEANER
LUBRICANT
Pedals Ensure that pedals are tight in
crank arms; that all screws on
pedals are tight; and that the
pedal straps are not frayed
Before each
use
N/A
N/A
Frame
Wipe down by using a soft
damp clean cloth
Daily
Water
N/A
Flywheel Wipe down by spraying on a
rag and applying a light coat
to sides of the flywheel
Weekly
WD-40
spray.
N/A
Brake
Pad
Inspect for excessive wear or
a dry leather brake pad
Weekly
N/A
3-IN-ONE Oil or 10W
oil. Do not use
silicone-based
lubricants
N/A
Inspect for excessive wear
or squealing
Troubleshooting
