CUSTOMER SERVICE 1-888-707-1880
10
Dyaco Canada Inc.© 2020
Email: [email protected]
Assembly Instructions
1-1 Console Mast
1. Pull the tie on Console Mast (12) to have Computer Cable (39) go through the mast from
bottom and out of the mast on top. Secure the Console Mast on the mounting plate on the
Main Frame with four 3/8" × 3/4"_Socket Head Cap Bolts (109), four Ø 3/8" × 2T_Spring
Washers (136) and four Ø 3/8" × Ø 19 × 1.5T_Flat Washers (133) by using L Allen Wrench
(148).
2. Plug all of the connectors into the back of the console (38); Computer Cable (39), two
Hand pulse Cables (41), Resistance switch wire (44) and Incline switch wire (45). Secure
the Console (38) on the console mounting plate with four Phillips Head Screws (111).
(Be
sure to not crush or damage wiring during process)
3. Place left and right Lower Handlebars (10) (11) onto left side and right side of Console
mast shafts, respectively and secure with Hex Head Bolts (99) together with Flat Washers
(132) by using Wrench (146).
