Xterra FS1.5 ELLIPTICAL Owner'S Manual Download

Page: 3 / 20

FS1.5 Elliptical

Record Your Serial Number

Please record the Serial Number of this fitness product

in the space provided below.

Serial Number

Register Your Purchase

The self-addressed product registration card must be completed in full and returned to

XTERRA Fitness

. You can also go to

www.xterrafitness.com/warrantyreg.html

to register online.

Product Registration

This product uses an external power supply. The

power supply must be plugged into the power jack,

located on the front of the unit near the stabilizer tube.

Next, plug the power supply into the appropriate wall

outlet. When not in use, it is recommended to unplug

the power supply from the wall outlet.

IMPORTANT:

If the product has been exposed to cold

temperatures, allow the product sit in room tempera-

ture to warm up before plugging in the power supply.

Failure to do so may result in damage to the display or

electronic components.

IMPORTANT

: Do not operate the product if the power supply, its plug, or its cord

has been damaged.

Power

Purchase Location
Purchase Date

Summary of Contents for FS1.5 ELLIPTICAL




















Search results

Summary of Contents for FS1.5 ELLIPTICAL

Reviews:

Related manuals for FS1.5 ELLIPTICAL

Brands by name

Popular brands

Xterra FS1.5 ELLIPTICAL, Owner'S Manual

Search results

Summary of Contents for FS1.5 ELLIPTICAL

Reviews:

Related manuals for FS1.5 ELLIPTICAL

Brands by name

Popular brands