Xterra FS1.5 ELLIPTICAL Owner'S Manual Download

Page: 2 / 20

Table Of Contents

ATTENTION

THIS ELLIPTICAL IS INTENDED FOR

RESIDENTIAL USE ONLY

AND IS

WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION

VOIDS

THIS WARRANTY IN ITS ENTIRETY.

Product Registration

Important Safety Instructions

FS1.5 Assembly Instructions

Operation of Your Console

Program Operation

Manufacturer’s Limited Warranty

Thank you for your purchase of this quality elliptical from

XTERRA Fitness

. Your new

elliptical has been manufactured by one of the leading fitness manufacturers in the world.

XTERRA Fitness

will do all we can to make your ownership experience as pleasant as

possible for many years to come. If you have questions, or if parts are missing or damaged,

or you require customer service, call (870) 336-4286. Please have your model number and

serial number handy when you call.

Please take a moment at this time to record below the name of the dealer, their telephone

number, and the date of purchase for easy contact in the future. We appreciate your

confidence in

XTERRA Fitness

and we will always remember that you are the reason that we

are in business. Please complete and mail your registration card today and enjoy your new

elliptical.

Yours in Health,

XTERRA Fitness

Congratulations On Your New Elliptical and Welcome to the XTERRA Fitness Family!

FS15_20130605

Summary of Contents for FS1.5 ELLIPTICAL




















Search results

Summary of Contents for FS1.5 ELLIPTICAL

Reviews:

Related manuals for FS1.5 ELLIPTICAL

Brands by name

Popular brands

Xterra FS1.5 ELLIPTICAL, Owner'S Manual

Search results

Summary of Contents for FS1.5 ELLIPTICAL

Reviews:

Related manuals for FS1.5 ELLIPTICAL

Brands by name

Popular brands