7
ERG400 Rower
1. Mount the Front Stabilizer (
6
) onto the Main Frame (
1
) by using two
Carriage Bolts (
93
) going through Front Stabilizer (
6
) and Main Frame
(
1
), two Curved Washers (
94
) and one Cap Nut (
95
). Tighten up with
12/14mm open end wrench.
2. Install right and left Wheel Covers (
54, 55
) on twin tube ends of the
Main Frame, be aware of not to mixed up between left and right, and
use Combination M5 Allen Wrench & Phillips Head Screw Driver (
97
) to
tighten with two Phillips Head Screws (
45
)
ERG400
Assembly Instructions
Hardware Step 1
Stabilizer Tubes & Wheel Covers
#93
. 3/8” x 59mm
Carriage Bolt (2 pcs)
#94
. 3/8” x 23 x 1.5T
Curved Washer
(2 pc)
#95
. 3/8” x 12.5T
Cap Nut
(2 pcs)
1
Summary of Contents for ERG400
Page 2: ......
