Xterra BT280, User Manual

Page: 10 / 24

9
FUNCTIONS
COMPUTER OPERATION INSTRUCTIONS
Button Function
A > “START/ STOP” Button
Press this button to start the operation of the treadmill with the starting speed at 1.0
KPH. Press it again to stop the treadmill with the speed gradually slow down until full
stop.
B > “SET” Button
Pressing this button resets TIME, DISTANCE, CALORIE .When in the manual mode, press this
button to set parameters TIME, DISTANCE, CALORIE . Although three parameters can be set,
only the last parameter set is accepted . In the pause mode, press this button, all values will be
cleared to zero back to idle mode.
C > “MODE” Button
In ready mode, Press "MODE" button to select the training mode. There are 12 built-in programs
and an HRC program to select.
D > “FAST” Button
1. Press the "FAST" button to increase the speed until the proper speed. Hold this key for 3
seconds will quickly increase the speed.
2. In setting mode, pressing "FAST" button changes the parameter (increases).
E > “SLOW” Button
1. Press the "SLOW" button to decrease the speed until the proper speed. Hold this key for 3
seconds will quickly decrease the speed.
2. In setting mode,pressing "SLOW" button to change the parameter(decreases).
F > “UP” Button
1. Press the "UP" button to increase the incline until the proper incline. Hold this key for 3
seconds will quickly increase the incline.
2. In setting mode, pressing "UP" button changes the parameter (increases).