Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. ©2014
8
STEP 2
Slide the upright cover (38) onto the upright (4).
Connect computer extension wire (33) to the lower computer wire (34).
Attach upright (4) to the main frame (1). Secure using four curved washers (16) and four
allen screws (18). Slide the upright cover down (38) onto the main frame.
Tip: Avoid pinching the Extension Wire
4
16 16
18
18
1
38
33
34
STEP 3
Thread the hand pulse wires (20) from the left handlebar (5L) into the small holes on the
upright (4) and pull out from the top bracket of the upright.
Attach left handlebar (5L) to the upright (4). Secure using two curved washers (16) and two
allen screws (18).
Repeat for right handlebar (5R).
Connect the hand pulse wires (20) to the wires from the computer (6).
Connect the extension computer wire (33) to the wire from the computer (6).
Attach computer (6) to the top bracket of the upright (4). Secure using four phillip screws
(27) which are pre-assembled on the back of computer (6).
Tip: Avoid pinching the Extension Wire
4
1
18 16
18
16
6
5L
5R
33
20
20
