Customer Service 1-888-707-1880
or email [email protected] Dyaco Canada Inc. ©2014
19
MAINTENANCE
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the reed switch should be adjusted. To adjust
the reed switch, the chain cover (45) must first be removed.
Remove the quick release knob (11), seat post cover (17) and seat post (7).
Remove the left pedal (9) from the run disc (48).
Remove the two self-tapping screws (40) from each side of chain cover (45). Remove another
seven ST5 x 15 self-tapping screws (55) from left chain cover (45L). Hold the chain cover (45)
near the back and pull it apart slightly.
Do not pull the chain cover apart at the top or the
seam may be broken.
9
10
17
11
40
40
55
55
55
55
55
45L
7
48
Next, locate the sensor wire (44). Turn the pulley until the magnet is aligned with the reed switch.
Loosen, but do not remove, the ST5 x 15 screw (55). Slide the reed switch slightly toward or
away from the magnet. Make sure that the magnet will not hit the reed switch. Retighten the
screw (55). Turn the pulley for a moment. Repeat until the console displays correct feedback.
