Customer Service 1-888-707-1880
- 6 -
Maurice Pincoffs Canada Inc. © 2011
Or email us at [email protected]
STEP 3
Remove the bumper
(45)
from the rail
(1).
Slide the Seat
(54)
on to the rail
(1).
Secure the bumper
(45)
on to the rail
(1).
NOTE:
1. Refer to the inset drawing. If it is difficult to slide the seat
(54)
on to the rail
(1).
You will need to
turn
the m6 nylock nuts (78) found on both sides of the seat carriage (
55)
counterclockwise to
lower the position of the roller.
2. If the seat
(54)
rocks after sliding it on to the rail
(1 you will need to
turn the M6 nylcock
nuts (78) found on both sides of the seat carriage
(55)
clockwise to raise the position of the
roller.
