background image

CUSTOMER SERVICE 1-888-707-1880                              Maurice Pincoffs Canada

©

2012

 

26

MANUFACTURER LIMITED WARRANTY, REPAIR AND SERVICE 

 
 

WHAT DOES THIS WARRANTY COVER? This warranty covers your Xterra Treadmill 
against defects in material and workmanship when used for the purpose intended, under 
normal conditions and provided it receives proper care. 

 

HOW LONG DOES THE COVERAGE LAST? This warranty lasts for two years on all 
parts, one year on labour from date of purchase, 10 years on the motor and lifetime on 
the frame.    This warranty is not transferable and is extended only to the original owner. 

 

WHAT WILL MAURICE PINCOFFS CANADA DO? Maurice Pincoffs Canada will provide 
a replacement part and/or service at no charge for any part found defective in 
workmanship or materials during the warranty period. 

 

HOW DO YOU GET SERVICE? In order to obtain replacement parts or service as 
provided by this warranty, you may call the number below:    1-888-707-1880 Monday to 
Friday 8:30 a.m. to 5:00 p.m. eastern standard time. 

 

To activate your warranty, you must send in your warranty registration card. 

 

This warranty shall not apply to treadmills which are (1) used for commercial or other 
income producing purpose, or (2) subject to misuse, neglect, accident or unauthorized 
repairs and alterations 

 

This warranty provided herein is in lieu of all other express warranties.    Any implied 
warranties, including any implied warranties of merchantability or fitness for particular 
purpose are limited in duration to the first 12 months from the date of purchase.    All 
other obligations or liabilities, including liability for consequential damages are hereby 
excluded.

 

 

All of the parts for the Xterra Treadmill, shown in figure can be ordered from:    MAURICE 
PINCOFFS CANADA INC., 6050 Don Murie Street, Niagara Falls, Ontario 

L2G 0B3

.  

When ordering parts, the parts will be sent and billed at the current prices.    Prices may 
be subject to change without notice.    Check or money order must accompany all orders.   
Standard hardware items are available at your local hardware store. 
 
To ensure prompt and correct handling of any errors, or to answer any questions, please 
call our Toll Free number, 1-888-707-1880, or local number 1-905-353-8955 or fax 
1-905-353-8968 or email us at [email protected]

or visit us at: 

www.pincoffs.ca.

 Office hours are from 8:30 A.M. to 5:00 P.M. Monday to Friday Eastern 

Standard time. 
 
Always include the following information when ordering parts: 

*Model number 
*Name of each part 
*Part number of each part 

 

 

Summary of Contents for 1640855




























Reviews: