28
Customer Service 1-888-707-1880 Dyaco Canada Inc. 2022
Email: [email protected]
USING HEART RATE TRANSMITTER (OPTIONAL)
How to wear your wireless chest strap transmitter:
1. Attach the transmitter to the elastic strap using the locking arts.
2. Adjust the strap as tightly as possible as long as the strap is not
too tight to remain comfortable.
3. Position the transmitter with the logo centred in the middle of
your body, facing away from your chest (some people must
position the transmitter slightly left of center). Attach the final
end of the elastic strap by inserting the round end and, using
the locking parts, secure the transmitter and strap around your
chest.
4. Position the transmitter directly below the pectoral muscles.
5. Sweat is the best conductor to measure every minute of
heartbeat electrical signals. However, plain water can also be used to pre-wet the electrodes
(2 ribbed oval areas on the reverse side of the belt and both sides of the transmitter). It's
also recommended that you wear the transmitter strap a few minutes before your workout.
Some users, because of body chemistry, have a more difficult time achieving a strong,
steady signal at the beginning. After "warming up," this problem lessens. As noted, wearing
clothing over the transmitter/strap doesn't affect performance.
6. Your workout must be within range - distance between transmitter/receiver
–
to achieve a
strong, steady signal. The length of the range may vary somewhat but generally stay close
enough to the console to maintain good, strong, reliable readings. Wearing the transmitter
directly on bare skin assures you of proper operation. If you wish, you may wear the
transmitter over a shirt. To do so, wet the areas of the shirt that the electrodes will rest upon.
Note: The transmitter is automatically activated when it detects activity from the user's heart.
Additionally, it automatically deactivates when it does not receive any activity. Although the
transmitter is water-resistant, moisture can have the effect of creating false signals, so you
should take precautions to completely dry the transmitter after use to prolong battery life
(estimated transmitter battery life is 2500 hours). The replacement battery is Panasonic
CR2032.
ERRATIC OPERATION
Caution! Do not use this treadmill for Heart Rate programs unless a steady, solid Actual
Heart Rate value is being displayed. High, wild, random numbers being displayed indicate a
problem.
Areas to look for interference which may cause erratic heart rate:
1. Treadmill not properly grounded - Proper grounding is a must!
2. Microwave ovens, TVs, small appliances, etc.
3. Fluorescent lights.
4. Some household security systems.
5. Perimeter fence for a pet.
6. Some people have problems with the transmitter picking up a signal from their skin. If you
have problems, try wearing the transmitter upside down.
7. The antenna that picks up your heart rate is very sensitive. If there is an outside noise source,
turning the whole machine 90 degrees may de-tune the interference.
8. Another Individual wearing a transmitter within 3 feet of your machine's console.
If you continue to experience problems, contact Dyaco Canada Inc. 1-888-707-1880
