XtendLan XL-RAID-SATA, User Manual

Page: 29 / 34

However, the priority for the XL-RAID-SATA is to
maintain the proper system operations. Therefore, the
data rebuilding speed will be extremely slow until the
system finished with the data saving operations.
Other Possible Situations
Q9: The Buzzer will not stop when the XL-RAID-
SATA is in operation.
A:
Please check whether the readings on the LCD display are
normal or if there is a hard drive failure. Please also pay
attention to any other symbols displayed in the LCD
display. For example, if the “F” symbol is displayed, this
means that there is a cooling fan failure. If the “T” symbol
is displayed, this means that the system is overheated.
Q10: How to turn on and off the Buzzer?
A:
1. The manufacture default setting for the Buzzer in
XL-RAID-SATA is Buzzer On.
2. The user can use any pointed materials to push the
bottom on the front dash board to turn on and off the
Buzzer.
27