NAS SYSTEM
Installation Configuration Manual
33
Volume List Options:
Delete
– Used to erase the Volume.
Extend
– Used to extend the total Volume capacity.
iSCSI
– Used to setup the Volume as iSCSI target.
3.1.2.1 Join a Disk to Storage Pool
Steps to Join a Disk to Storage Pool:
1. Click “Join Disk”.
2. A dialog box will be displayed. Select a RAID disk to be joined to the Storage Pool of
NASVG. Click “OK” when done.
3. The RAID disk will be joined to the NASVG.
NOTE: An un-used physical disk drive can be used to join to the
Storage Pool of NASVG but it is not recommended because the
physical disk drive does not have RAID Level nor provide data
redundancy. Select only a RAID disk to add into the Storage Pool for
better data security.
