IP Power Manager XL-IPM401 User’s Guide
7
www.xtendlan.com
2 Installation
2.1 Hardware & Software installation
Before you start to use XL-IPM401, please follow the steps below
¾
Check the package to make sure the contents is complete.
¾
Prepare one Ethernet HUB or Router
¾
Check the voltage of the power supply to make sure it is AC 110-240 volt
¾
Please confirm the specification of your power cable.
¾
Please use the 10A power cable.
2.2 Hardware installation
1.
Connect the XL-IPM401 to HUB through network wire.
2.
Connect the HUB or Router to the internet (may through ADSL/XDSL modem).
3.
Connect the power adapter to the XL-IPM401.
4.
Connect the power adapters of under control electric equipment to corresponding out port of XL-IPM401.
Turn on your computer and the power adapter of XL-IPM401.
Please note: use power wire can support 10A current (for 240V AC).
Max. output current: (total) 10A, (individual) 6A.
