IP Power Manager XL-IPM401 User’s Guide
10
www.xtendlan.com
2.4.2 Power Supply State Query
Click the “ Set Power” button on the left, the page will be refreshed. The state of each electric outlet will be
displayed in column control.
2.5 System Settings
User can set the password, IP address, e-mail address, timer setting, online firmware update, and the time of
XL-IPM401 through the system settings.
2.5.1 Setting the password
Click the “ Change password “ button on the left you can enter the change password page. The default
password of XL-IPM401 is 12345678.
User can change it into any password (not longer than 8 bit), then click apply button to save the change.
Note: If forget the password, use username "super user " when log in webpage and then click "OK " turn
power off for few second and then turn ON power . XL-IPM401 will to set back to default password. (There
is space between super and user.)
2.5.2 Setting the IP address
Click the “ Setup “ button on the left side; fill in the proper IP address, Subnet Mask, Default Gateway, DNS.
If you choose to use DHCP, please make sure that your network support DHCP service so the XL-IPM401
will search and gain an IP address automatically when it starts. You can also control the Beeper sound .
