Wireless – Wireless Mode
There are 3 operating modes in each A,B/G band, using the following setting can perform each function.
Wireless-A Settings
Access Point:
This mode provides access for wireless stations to wired LANs and from wired LANs to wireless stations. This
mode is not only performing AP function but also support WDS connection. Input remote AP’s MAC address in below 4 fields can
generate 4 WDS connections with this AP.
Repeater:
This
mode can be a repeater in your WLAN architecture. Input a SSID that you want to associate in right field.
Wireless Client:
This
mode can be a client as general WLAN card in your WLAN architecture. Input a SSID that you want to
associate in right field. Using one computer with Ethernet interface to connect this device, then the computer will has capacity of
WLAN association.
Wireless-G Settings
Access Point:
This mode provides access for wireless stations to wired LANs and from wired LANs to wireless stations. This
mode is not only performing AP function but also support WDS connection. Input remote AP’s MAC address in below 4 fields can
generate 4 WDS connections with this AP.
Repeater:
This
mode can be a repeater in your WLAN architecture. Input a SSID that you want to associate in right field.
Wireless Client:
This
mode can be a client as general WLAN card in your WLAN architecture. Input a SSID that you want to
associate in right field. Using one computer with Ethernet interface to connect this device, then the computer will has capacity of
WLAN association.
Change these settings as described here and click the
Apply
button to apply your changes or click
Cancel
button to cancel your
changes. For additional information, click
Help
.
WAP-1001 User’s Guide
8
