3.
How to Configure the Dual Band AP
START UP & LOGIN
In order to configure the Wireless 11ag AP, you must use web browser and manually input http://
192.168.1.250
into the Address box
and press Enter. The Main Page will appear.
TURN ON POWER SUPPLY
Quick power cycle would cause system corruption. When power on, be careful not to shut down in about 5 seconds,
because data is writing to the flash.
In order to configure the Wireless 11ag AP, you must input the password into the
Password
box and leave blank on the
User Name
box. The default password is “
admin
”.
Once you have logged-in as administrator, it is a good idea to change the administrator password to ensure a secure protection to the
Wireless 11ag AP. The Security Settings section described later in this manual describes how to change the password.
Once you have input the correct password and logged-in, the screen will change to the Setup page screen.
WAP-1001 User’s Guide
5
