by the AP. To broadcast the AP's SSID, keep the default setting,
Enabled
. If you do not want to broadcast the AP's SSID, then
select
Disabled
.
Channel
: Select the appropriate channel from the list provided to correspond with your network settings. You shall assign a
different channel for each AP to avoid signal interference. If you want the AP to automatically scan for a clear channel, then select
Auto (DFS)
.
Wireless-G Settings
If you are using a Wireless-B, Wireless-G, or Wireless B+G network, then the following settings that you may need to configure.
Mode
: This option can control B/G band on/off.
Radio Policy
: From this drop-down menu, you can select the wireless standards running on your network.
If you have both 802.11g and 802.11b devices in your network, keep the default setting ---
b/g mixed
.
If you have only 802.11g devices, select
802.11g Only
.
If you have only 802.11b devices, select
802.11b Only
.
If you want to run a high-speed transmission, select
802.11g Turbo
.
Network Name (SSID)
: The service set identifier ( SSID ) or network name. It is case sensitive and must not exceed 32 characters,
which may be any keyboard character. You shall have selected the same SSID for all the APs that will be communicating with
mobile wireless stations.
Broadcast SSID
: When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID
broadcast by the AP. To broadcast the AP's SSID, keep the default setting,
Enabled
. If you do not want to broadcast the AP's SSID,
then select
Disabled
.
Channel
: Select the appropriate channel from the list provided to correspond with your network settings. You shall assign a
different channel for each AP to avoid signal interference.
Change these settings as described here and click the
Apply
button to apply your changes or click
Cancel
button to cancel your
changes. For additional information, click
Help
.
WAP-1001 User’s Guide
7
