VIP-150W User’s Guide
-4-
2.
Setup
2.1
Install the battery
•
Pull down the battery cap by push the battery cap lock.
•
Then move battery cap upward to open.
•
Put in the battery.
•
Put back the battery cap while the top of the cap is 3mm gap.
•
Push the cap toward to the top until you hear the click from the lock.
2.2
Power on
The first time battery should be fully charged. Usually it will take 2 hours for normal charge. Turn on the
power by press the [on-hook/PWR] key for more than 3 sec. It will show the boot up sequence. (Scan AP/
Network Initializing/ DHCP Initializing/ DSP Initializing). When the phone boots up ok, it will show the
following screen.
WLAN signal strength
Battery status
2.3
Setup the necessary parameter
Setup mode, press middle Softkey in the standby display, it will show 9 icons. Press [Select] while
move the icon to {Settings}. It will show the following screen.
Main menu
Settings
