VIP-150W User’s Guide
-5-
2.3.1
Setup Wireless
•
The 1
st
time when you boot up the phone, it will automatically search for the available AP. You
can also select by yourselves by following Step.
•
Select <Wireless Setting>, use up/down navigation key by scroll in the Setting Menu and press
[Select] Softkey.
•
Select <SSID>, select {ESSID} in the wireless setting menu.
•
It will show available AP. Then, select the one you want to connect.
•
Press [Select] to connect. When go back to the <Wireless Setting>, press [Exit] to exit.
2.3.2
Setup IP address
•
Default IP address is DHCP. You can also setup manually.
•
Select <Network Setting>, use up/down navigation key by scroll in the Setting Menu and press
[Select] Softkey.
•
Select <IP Address> by press [Select].
•
Input IP address, press [OK] to go back to Network setting menu.
•
Do it in as the same way to the Subnet Mask and Default Gateway.
2.3.3
SIP Setting
•
Use the same way as 2.4.2. to input the SIP display name/SIP Account Name/ SIP Password/SIP
Port/ SIP Server.
•
The UP key stand for toggle of the number and English character.
2.3.4
STUN & UPnP Setting
•
When you are behind the NAT. you should setup the STUN or UPnP to enable the NAT traversal
function.
•
The UPnP will support in some NAT router. Enable the UPnP function of router by reference to
the operation manual of your router.
3.
Make/Receive a call
3.1
Make a call by number
Dial number and press [off-hook], if you have already registered to
the SIP server. When the call is valid, then it will show the ringback.
You could hear the ring back tone and wait for the callee to answer
the call.
