XtendLan TC-965, User Manual

Page: 14 / 65

and hot swapping for up to 127 external devices. The USB interface complies with USB UHCI,
Rev. 2.0 compliant. The USB interface can be disabled in the system BIOS setup.The USB
connector is used for connecting any device that conforms to the USB interface.Many recent
digital devices conform to this standard. The USB interface supports Plug and Play, which
enables you to connect or disconnect a device whenever you want, without turning off the
computer.
Pin Definition
1 VCC
2 USB_P+
3 USB_P-
4 GND
2.3.3 Ethernet connector
（
LAN
）
The TC-965 is equipped with an REALTEK 8111C (WOL supported) Fast Ethernet
controller that is fully compliant with IEEE 802.3u 10/100Base-T CSMA/CD standards .The
Ethernet port provides a standard RJ-45 jack connector with LED indicators on the front side to
show its Active/Link status (Green LED) and Speed status (Orange LED).
RJ45 PORT LED state description
：
LILED(Green)
Network link
status
ACTLED(Orange)
Message transfer
status
on
effective
on
transfering
off noneffective off
No message
transfering
LAN define
：
Signal Name Pin Signal Name