Q7. Everything is running OK except that USB drive is not working.
(1) In the Setup page of the terminal, you can choose to enable or disable USB disk function. If you
need USB disk function, please go to the Setup page and enable it. Save the change and then connect
to the Host PC.
(2) Please plug the USB disk into the terminal after logging onto the Host PC, then you can access
the USB disk by clicking the “Computer” on the desktop. Only the user of the terminal has access to
the USB disk.
(3) If the USB disk is not detected by the system, please unplug it and then plug it again. If it is still
not working after repeated actions, please log off your account from the Host PC, turn off the power
of the terminal and then restart it again.
Q8. Everything is running OK except that USB printer is not working.
(1) Please make sure that the printer works normal when connect to the Host PC. You can follow
instructions in the printer user manual to set up the printer.
(2) There is an option of enable USB printer in the Setup page of the terminal. Please make sure that
USB printer is enabled on the terminals which require USB printer. You can go to the Setup to make
the change, save it and connect to the Host PC again.
(3) After logging onto the Host PC, plug in the USB printer to the terminal. By now there will be a
printer in the “fax and printer” list with status to be “ready”. This means the USB printer is now setup
correctly.
(4) IF the USB printer is not detected by the terminal, you can unplug it and then plug it in again.
Q9. The audio function is not working, no audio playback or MIC recording.
(1) There is an option of enabling or disabling Audio (sound) function in the Setup page of terminal.
Please enable the sound function of those terminals which will be running audio applications, save
the change and then connect to the Host PC again.
(2) Check the audio devices on the host PC. Open “Control Panel” > “Sounds” > “Sound Playback”, if
you see that the Default device is NetPoint Virtual Audio, this means the Audio device is not properly
installed. Please follow the steps in Q1 to reinstall NetPoint.
Summary of Contents for TC-60xL
