XtendLan SDOMEOIR6-CM10, User Manual

Page: 9 / 26

9
(4) Targets are behind the glass covered with water droplets or dust;
(5) Targets are moving quickly;
(6) Monotonous large area targets, such as wall;
(7) Targets are too dark or faint.
BLC(Back Light Compensation)
If the light of background is bright, the target in the picture may appear dark or as a shadow.
BLC enhances exposure of the target in the center of the picture. The dome adjusts the iris
according to the center of the pictures. If there is a bright light source outside this area, it will
wash out to white. The camera will adjust the iris so that the target in the sensitive area will be
properly exposed.
Iris Control
Factory default is automatic camera aperture, in mode of which camera senses changes in
ambient light through moving and adjust automatically lens aperture to make the brightness of
output image stable.
Ratio Speed
Intelligent pan and tilt speed is variable depend on the zoom factor. When zooming in, the
speed will become slower and when zooming out, the speed will become faster.
360 Scan
Dome
360°clockwise continuously scans the display scene at set speed in horizontal direction
under the condition that pitch angle remains the same. In the scanning status, operator can
move the joystick to exit from scanning.
Preset
After the dome camera keeps arbitrary PTZ location, it will automatically move to the defined
position when preset is called.
Guard Tour Scan
Dome patrol scans according to certain edited preset order.
Limited Points Scan (A-B Scan)
The dome operates reciprocating scanning the real scenarios at a certain speed between the
set left and right points. The range of left and right points boundary
is 20° - 340°.
Power Off Memory
This feature allows the dome to resume its previous preset or status after power is restored. By
default setting, the dome support power up memory, which improves the reliability and avoids
repeated settings of the parameter.
Park Action
If users
don’t operate the dome in set time, it will automatically run preset specific mode (pan
scan, A-B scan, park action, cruise, preserve action etc.).
Multilanguage OSD Menu
The available language on screen menu can be English, German, Italian, French or Spanish.