14
Search Device
Chapter3
3.1
Search Device and Modify Network
Parameters
Run “SearchNVS” to find the default IP and modify mega pixel IP camera
network parameters according to clients
’ local PC IP gateway (Such as IP
address, subnet mask, gateway and so on)
3.1.1
Run SearchNVS software
How t
o run “SearchNVS”:
1. Find the NVSCenter software in
【
Application
】
file from the CD and then
install it.
2. Click
【
Start
】
---
【
all programs
】
---
【
NVS Center
】
---
【
Search NVS
】
to run it.
Note:
The default factory settings of the IP Camera are as follows:
IP: 192.168.55.160
Subnet mask: 255.255.255.0
User name: admin; Password: admin
Run the SearchNVS software to search and modify IP Camera network
parameters. It is multicast protocol. But the firewall forbids the multicast data
packet. So please close the firewall first.
【
Local IP
】
Display the local PC IP. If your PC is NIC or multi-addressed
local IP, please select one IP address to connect NVS.
The main window indicates that your PC has found the IP camera in LAN. If
there are several IP cameras in your LAN, you can determine which camera is
the one you purchased through “device name” in the main window. There is a
unique device ID number in your package. T
he default device name is “NVS +
device ID number”.
3.1.2
Set IP address
The gateway of your IP camera and local PC must be the same so that you
can visit the IP camera. So we need to set the IP address for the IP camera
before using.
