XtendLan DVR-410AUTO User
‘s Guide
50
4.4.3 Image FTP
In Network interface, you can set FTP server information. Please enable FTP function and then
click save button. See Figure 4-16.
Please boot up corresponding FTP server.
Please enable schedule snapshot (Chapter 4.4.2.1) or activation snapshot (Chapter 4.4.2.2)
first, now system can upload the image file to the FTP server.
Figure 4-16
4.5 Detect
4.5.1 Go to Detect Menu
In the main menu, from Setting to Detect, you can see motion detect interface. See Figure
4-16. There are three detection types: motion detection, video loss, camera masking.
z There is no region setup item and sensitivity setup item in video loss and camera masking type.
z You can see motion detect symbol in corresponding preview channel when a motion detect alarm
occurs.
z
Please use Aux button to help when you use the mouse to drag the motion detect region.
Right click the mouse to exit current region setup interface. Please click the Save button to save
current setup.
4.5.2 Motion Detect
Detection menu is shown as below. See Figure 4-17.
z
Event type: from the dropdown list you can select motion detection type.
z Channel: select the channel to activate recording function once alarm occurred. Please make sure
you have set MD record in encode interface(Main Menu->Setting->Schedule) and schedule record
in manual record interface(Main Menu->Advanced->Manual Record)
z
Latch: when motion detection complete, system auto delays detecting for a specified time.
The value ranges from 1-300(Unit: second)
z Region: Click select button, the interface is shown as in Figure 4-18
.
Here you can set motion
detection zone. There are 396(PAL)/330(NTSC) small zones. The green zone is current cursor
position. Grey zone is the motion detection zone. Black zone is the disarmed zone. You can click
Fn button to switch between the arm mode and disarm mode. In arm mode, you can click the
direction buttons to move the green rectangle to set the motion detection zone. After you completed
the setup, please click ENTER button to exit current setup. Do
Summary of Contents for DVR-410AUTO series
