XtendLan DVR-410AUTO User
‘s Guide
130
7.3.3.7 Abnormity
The abnormity interface is shown as below. See Figure 7-50.
Figure 7-50
Please refer to the following sheet for detailed information.
Parameter
Function
Event
Type
z
The abnormal events include: no disk, no space, disk error, net error.
z
You need to draw a circle to enable this function.
Normal
Out
The corresponding alarm activation output channel when alarm occurs,
There are three channels.
Latch
The alarm output can delay for the specified time after alarm stops. Then
system disables alarm and corresponding activation output.
The value ranges from 1s to 300s.
Send email
If you enable this function, system can send out email to alarm the
specified user.
Alarm
upload
System can upload the alarm signal to the network (includes the alarm
centre.)
Show
message
System can display alarm information in local DVR screen.
Summary of Contents for DVR-410AUTO series
