6
letters “Configure code”, then release the buttons and it will enter
the coding status.
2).At this time, press the call button in outdoor camera when it is in
standby status until the red indicator remains lit and creates two
sounds “Di Di ”, then release the button and it will enter the coding
status.
3)If the handset monitor shows the letters “successed” within 8s, the
coding is successful and the call station and handset monitor have
successfully paired; at this time, the outdoor call station will create 3
sounds “Di Di Di”. If the handset monitor shows the letters "failed"
within 8S, then it means that the coding is failed and the outdoor
station will have no response
.
Note
:
After successful coding, then the outdoor camera and handset
monitor are the 1st outdoor camera and 1st handset monitor
respectively; if coding is failed, you should do the coding again.
Receive code
(only required when adding one more call station or
one more handset monitor.)
Adding one more handset monitor :
1).Press the “ ” and “ ” buttons at the same time, when the 1st
handset
monitor is in ON status until the screen shows “transmit
code”, then release the buttons and enter the “transmit code” status.
2).On the additional handset(2nd) after “transmit code” is displayed
on the 1st handset, press the “ ” and “ ” buttons at the same time
on the 2nd handset when it is in ON status until the screen shows
“receive code”, then release the buttons and enter the “receive code”
status, then press the “
” button at this time in 2nd
handset
monitor. If it shows “successed” on the handset, it means that the
coding has been successful.
Adding one more outdoor call station :
1).Press the “ ” and “ ” buttons when the handset is in the ON
status until the screen shows “transmit code”, then release the
buttons and enter the “transmit code”status.
2).Then press and hold the call button in outdoor call station until
