9
status, then the screen will display “monitoring 01”.
2).If the outdoor call station receives a signal within 1S, then it will
display the 1st outdoor station; if not receiving the signal within 4S,
then it will auto-exit the monitor status.
3).In monitor status, press the “ ” button again, then it will exit the
monitoring of 1st outdoor call station. The monitor time is 60S. After
60S, it will auto-exit the monitor status.
One to two or two to two system:
1)Press the “ ” button when the handset monitor is in standby
status, then it will monitor the 1st outdoor station (It will display
monitoring 01
”
); press this “ ” button again, then it will monitor
the 2nd outdoor station (It will display“monitoring 02”); press the “
” button in third time, it will auto-exit the monitoring status.
2)If receiving a signal within 1S, then it will monitor the outdoor
station; if not receiving the signal within 4S, then it will auto-exit the
monitor status.
3)In standby status, press the “ ” button to start or end the
monitoring of outdoor stations. After 60S, it will auto-exit the status.
Basic operation
one to one intercom:
1).In standby status, when a visitor presses the call button on call
station, then the power indicator will still light.
2).a.If not receiving a response signal within 4S, then it will sound
“Di Di Di Di”, and it will end the call status and return to the standby
status.
b.If receiving a response signal, the handset will display
“Talking”and the outdoor station will still sound “Du Du”, then the
power indicators of handset/s will light and play the selected ring
tone/s; meanwhile the TFT-LCD will display the visitor’s image.
3).a.If no one answers the call, the call will last 60S and return to
the standby status.
b.If some one presses the “ ” buttons, then it will stop playing
the ring tone and enter the talk status (The indicators in handset
monitors will turn from red to green and stay lit), the talk time is
