8
Outdoor call station:
Press the code-clear button (the code-clear button is in the back of
outdoor call station, for details, please refer to the
lock connection
section. Its icon is . ) and it creates one “Di” sound. This means
that code clearing is successful.
Note: Be careful when doing this, as it will cause a malfunction. You
will then need to carry out the coding procedure of outdoor call
station and handset again. See above for CODING and RECEIVE
CODE sections.
Setting of ring tone
Press the “ ” (ring tone selection button) when the handset
monitor is in standby status, until a ring tone sounds, the
monitor is now in ring tone selection mode. At this time, press
the “ ” button successively to choose another tone(A total 12
ring tones are available for selection ). After choosing your
favorite tone, press the “ ” button to confirm, or wait until the
playing tone is ended, then it will auto-exit.
Adjusting brightness
There are 6 levels for brightness adjustment.
Press the “ ” button when the handset monitor is in talk status or
surveillance function(For details, please kindly refer to the BASIC
OPERATION and SURVEILLANCE), then the brightness level will
become higher. At this time, it will show “Val 0i” on the handset
monitor (“ i ”is to indicate the brightness level). When the brightness
is adjusted up to maximum level, if you press this button again, then
it will be invalid.
Press the “ ” button when the handset monitor is in talk status or
surveillance status, then the brightness level will become lower. At
this time, it will show “Val 0i” on the handset monitor (“ i ” is to
indicate the brightness level). When the brightness is adjusted to
minimum level, if you press this button again, then it will be invalid.
Surveillance
One to one intercom:
1).Press the “ ” button when the handset monitor is in standby
