9
10
3-2 PROCESSING AND RUNNING
3. Click the “START” button, which will then become “PAUSE”. Start commissioning of
automatic processing; observe equipment action and interface instructions until the
processing is completed without abnormality.
4. Check if size and appearance parameters of the processed test work pieces are
within the qualified range. If there is no problem, then commissioning is completed and
normal processing can be started; if there is any problem, then make parameter adjust-
ments based on the actual condition.
1. After completing the commissioning operation, formal production can be started. The
operation steps of formal production are basically same as the commissioning operation
steps.
2. In manual mode, click the "FIRST REFERENCE" button and the axes will automatically
return to a position suitable for loading and unloading material plate. Then load the work-
piece into the holder and tighten the screw evenly.
3. Switch to auto mode and load correct processing files, then the system will automatical-
ly select corresponding processing strategies according to the file information. Adjust the
system parameters and related auxiliary functions and click the "START" button after con-
firmation to perform automatic processing.
4. If there is a need to suspend processing during the processing period, then click the
"PAUSE" button. If there is a need to stop processing, then click the "STOP" button. If there
is any abnormality in the processing process, the system will automatically interrupt the
current processing and retain the current line information; users can click the “START”
button to continue the interrupted processing after eliminating abnormalities.(Do not click
the “STOP” button; otherwise the processing will start from the beginning again)
5. If power cut happens during the processing period, restart the software when the
system is powered on again, and the system will automatically load the previous process-
ing files and recover the interrupted line information that being saved. Users can click the
"START" button when the system loading is completed, then the processing before power
failure can be restored. (Do not click the “STOP” button; otherwise the processing will start
from the beginning again)
Figure 3-1
