DPA Series — DPA80/DPA100 Operating Instructions
Page 75
ta
x
Appendix II: Upgrading Firmware and Loading Presets
Loading new firmware or presets uses the same “Flash Loader” utility that is bundled with
the firmware or presets “bin” (binary) file. Firmware (or Program) files have the prefix
“LTAM”, and preset files have the prefix “LTAR”.
Amplifier Communications Set-up
Updates can be performed through an Ethernet, US or RS485 connection. Choose the correct
port on the amplifier and configure it accordingly though the Interface Sub-menu. See page
50 for more info on choosing the interface.
Download the Files
Go to the Support
>
Latest Software section of the XTA website to find the latest firmware or
presets — these will be bundled with the “Flash Loader” application that is used to connect
and update your amplifier.
Unzip the files — you will have the loader application, and the firmware or preset file as
appropriate.
