Operators Manual
Page 15
Free Assign Routing
If none of the preset configurations are appropriate to the required system setup, it is possible to manually select the
routing of the crossover. This is achieved through the
Crossover Menu
Crossover Menu
Crossover Menu
Crossover Menu -
-
-
-> Design A Crossover
> Design A Crossover
> Design A Crossover
> Design A Crossover
.
Pressing
ENTER
will start the crossover design wizard, with the first option being to choose the routing.
The display will show
Design
Design
Design
Design A Crossover
A Crossover
A Crossover
A Crossover -
-
-
->
>>
>
Routing = 2 X 4 WAY *
Routing = 2 X 4 WAY *
Routing = 2 X 4 WAY *
Routing = 2 X 4 WAY *
or whatever the current configuration is set to. Press
BACK
until the display shows
Design A Crossover
Design A Crossover
Design A Crossover
Design A Crossover -
-
-
->
>>
>
Routing = Free Assign
Routing = Free Assign
Routing = Free Assign
Routing = Free Assign
And then press
ENTER.
The
EDIT
key will illuminate for output 1, as will any relevant input
EDIT
keys, showing which
inputs are feeding output 1. The display will also detail the current combination of inputs feeding this output. To change
the routing for any output, press its
EDIT
key, and then choose the required input channel combination by just pressing
the input
EDIT
keys as appropriate. The input combinations can also be stepped through in turn by pressing
NEXT
, or
BACK
.
To complete the procedure, press
ENTER
. The wizard will continue, and if the routing has been changed, all outputs will
be muted on exit.