22
function and press to disable.
Test method: Tilt the climber
until the brake wheels leave
ground. the climber cannot be
pushed forward, only
backward. Then the brake is
working , otherwise it’s fail
3.7 Two-Speed Climbing Mode
Light
High/low
speed switch
Each time power on, the
initial state is low speed
mode, indicator lights green,
short press the self-reset
switch for 0.2 second to
switch modes. The lights will
switch colors, gear “
－
” is
low speed mode (flash
green), gear “
＝
” is high
speed mode (flash red).
This machine has angle
controlling function. When
the stair climbing machine is
started at wrong operation
angle(too large or too small),
the rotate speed of climbing
arm will slow down. This is an
angle protection feature, not
a fault. Press the high/low
speed
switch
about
3
seconds to turn off the LED
Brake
