xsto SCL170A, Operation Manual

Page: 27 / 44

25
the automatic adjustment mode of the height of the loading
board.
(1) When the mode is just started, the loading board will
reset itself.
When the mode is started, if the loading board is above the
lower sensor, when performing automatic reset, it will
automatically rise to the upper limit, and then automatically
descend to the target height, and the automatic positioning is
completed.
When this mode is activated, if the loading board is under
two sensors, when performing automatic reset, it will
automatically rise first, sense the sensor, and then automatically
descend to the target height, and the automatic positioning is
completed.
When the mode is started, if the load plate is in the state of
sensing two sensors at the same time, and the automatic reset is
executed, it will automatically descend to the target height and
the automatic positioning is completed.
(2) When the boxes are stacked on the loading board, the
loading board will automatically descend and the top box surface
will always be at the proper height.
(3) When the stacked boxes are moved away from the
loading board, the loading board will automatically rise, and the
top box surface will always be at a proper height.