19
Insert the 24V battery pack and
turn on the battery switch.
Note: Before turning on
the battery switch, make sure
the battery is inserted in the
battery holder and the power
cord is connected well.
3.5.2Initial position
After confirming that the goods
are firmly fixed, move
CT250/300/250A/300A to the edge of
the stair, and move both sides of the
tracks close to the edge of the first
step at the same time. Set
CT250/300/250A/300A to the Loading
board control mode through the
switch button. After adjusting the
goods to a safe Angle, set
CT250/300/250A/300A to the
automatic mode through the switch
button and then set speed to gear 1,
and use the crawler mode to go
upstairs.
3.5.3At every first 3 steps when going upstairs
