Xsensor ForeSite SS, User Manual

Page: 64 / 70

Appendixes 60
4) Place the sensor pad on the desired supporting surface, such as a chair or
a bed. Ensure that the sensor’s grid is facing towards the subject applying
the pressure.
The following label on the sensor indicates it is cleanable as described:
CLEANABLE
CLEAN ONLY AS
RECOMMENDED
IN USER GUIDE
If the sensor has one of the
following markings, it is
cleanable as per the Cleanable
Sensor Instructions section of
this User Guide.
5) The ForeSite SS Desktop system is now ready for use. Before the
subject makes contact with the sensor, ensure that they do not have
any sharp objects or protrusions that may puncture/tear the sensor
pad covering material.
Warning: Neither sensor pads nor protective sleeves are intended for
contact with bare skin.
II. DUAL SENSOR PAD SYSTEMS
• Dual sensor pad systems include all the same components as listed
above for the single pad systems with the exception of:
ͧ 1 additional Pressure Imaging Sensor Pad
ͧ 1 additional Wireless Sensor Pack (X4)
• The dual sensor pad system is set-up the same way as the single
sensor pad system with the exception that it requires you to repeat
the instructions above for charging, connecting and powering ON your
second X4.