10
www.xsens.com
The rest of the software setup is the same as described above. However, instead of
clickingRecord in Xsens software, one should click the hardware trigger supplied by
Noraxon, to generate a manual trigger to both systems.
5.1.3
XSens Software
1.
In the Configuration window, in the Sync tab you should select:
Strat recording (in)
Stop Recording (in)
•
In 1
•
Polarity: Rising Edge
•
Skip Factor = 1
•
Skip First = 0
•
Delay = 0 ms
•
Trigger once: uncheck
•
In 1
•
Polarity: Rising Edge
•
Skip Factor = 1
•
Skip First = 1
•
Delay = 0ms
•
Trigger once: uncheck
To initialize recording, click the record button.
The normal red dot icon will change to a pause symbol, indicating that the software is
waiting for an external pulse.
Figure 10 - Motion Capture Configuration window in MVN Analyze. Setting on the sync tab.
Figure 11 - Record button. a) before clicking, b) after clicking, with sync-in activated.
Figure 9 - Configuration of TeleMyo mini-receiver in Noraxon MyoResearch software.
