19
EN
Common used TDS conversion factors
Conductivity of solution
TDS conversion factor
0-100 μS/cm
0.60
100-1,000 μS/cm
0.71
1-10 mS/cm
0.81
10-100 mS/cm
0.94
Datalogger functions
(pH70+DHS, , PC70+DHS)
Manual storage
When
icon appears, press momentarily
key, M+ icon and
storage serial number appear on LCD, storing measuring information.
Automatic timing storage
Set the storage timing into the setup menu P6.3,
icon appears on LCD
and the meter enters into the timing storage mode. Press momentarily
key to start the data automatic storage,
flashes
on the display. To stop the recording, press momentarily
key,
icon stops flashing and the meter stops automatic storage.
In automatic storage mode, manual storage does not work.
Set time 00:00 per parameter P6.3 to exit from the automatic storage mode.
Recall stored value
In the measurement mode, press
key to recall the last stored
measuring value. RM icon and storage serial number appear on the display.
Press
and
keys to slide all the stored values.
Press
to return in measurement mode.
Clear stored value
Select
YES
into the setup menu P6.7 to clear all stored value.
Summary of Contents for pH 70 Plus
Page 1: ...1 EN ...
