Complete Menu System Reference
Set Alarm 1: Controls 1st alarm
● On/Off : I’ll let you guess what it does :)
● Alarm Frequency:
○ Custom: Let’s user choose any combination of days when alarm will sound
■ Mon: Y/N
■ Tue: Y/N
■ ....
■ Sun: Y/N
■ Exit: This option will exit day selection and goes to following time
○ Daily: Alarm will sound every day
○ Weekdays: Alarm will sound on usual workdays, i.e. Mon-Fri
● Alarm Hours/Minutes: Let’s you select time when alarm will sound
● Tone: Select Tone/Melody that’s played back as alarm. Tones 1-5 are escalating, 6-10
are played at full volume
Set Alarm 2 : Controls 2nd Alarm (Same options as above)
Time/Date: Sets current Time/Date
● Hours/Minutes
● Day/Month/Year (maximum Year allowed 2040, after which it goes back to 2013)
Sys Setup: Sets global clock settings
● Mode: Choose 12 hour (AM/PM) or 24 hour clock mode
● Brightness: Select LED display brightness from Night (lowest) to Max (brightest)
● Color: Sets Clock Color. Choices are Green, Red or Orange
● Font: Select Font of Main (big) clock display.
● Temp: Chooses temperature units. F = Fahrenheit = Celsius
● Sound Vol: Volume of System sounds and announcements. Does not affect alarm
volume.
● Startup: Turns on/off startup sequence when clock is reset or powered on
● RF Sensor: Turns on/off optional RFM12B sensor. Reboot required.
Warning:
Do not turn on if you don
’t have RFM12B chip installed!
Warning:
You must reboot/reset clocks if you turn this feature on or off.
● IR Receiver: Turns on/off optional infrared remote accessory. Reboot required.
