background image

2

BEFORE YOU START

The XII is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. 

This is not a toy; it is a precision car model. This model racing car is not intended for use by beginners, inexperienced customers, or by children without direct 

supervision of a responsible, knowledgeable adult. If you do not fulfill these requirements, please return the kit in unused and unassembled form back to the 

shop where you have purchased it. Before building and operating your XII, YOU MUST read through all of the operating instructions and instruction manual 

and fully understand them to get the maximum enjoyment and prevent unnecessary damage. Read carefully and fully understand the instructions before 

beginning assembly. Make sure you review this entire manual and examine all details carefully. If for some reason you decide the XII is not what you wanted 

or expected, do not continue any further. Your hobby dealer cannot accept your XII kit for return or exchange after it has been partially or fully assembled. 
Contents of the box may differ from pictures. In line with our policy of continuous product development, the exact specifications of the kit may vary without 

prior notice. 

Failure to follow these instructions will be considered as abuse and/or neglect.

In line with our policy of continuous product development, the exact specifications of the kit may vary. In the unlikely event of any problems with your new 

kit, you should contact the model shop where you purchased it, quoting the part number. We do reserve all rights to change any specification without prior 

notice. All rights reserved.

CUSTOMER SUPPORT

   

We have made every effort to make these instructions as easy to understand as possible. However, if you have any difficulties, problems, or questions, please 

do not hesitate to contact the XRAY support team at [email protected]. Also, please visit our Web site at www.teamxray.com to find the latest updates, set-up 

information, option parts, and many other goodies. We pride ourselves on taking excellent care of our customers.

You can join thousands of  XRAY fans and enthusiasts in our online community at:  www.teamxray.com

XRAY USA

RCAmerica, 167 Turtle Creek Boulevard 

Suite C      

Dallas, Texas 75207, USA

Phone: (800) 519-7221 * (214) 744-2400

Fax: (214) 744-2401

E-mail: [email protected]

XRAY Europe

K Výstavisku 6992 , 91101 Trenčín

Slovakia

EUROPE

Phone: 421-32-74401100

Fax: 421-32-74401109

E-mail: [email protected]

Summary of Contents for XLL Link

































Reviews: