To prevent dust apply one of the included stickers on the
rear part of the chassis to cover the center balancing hole.
REMOVE ALL THE SCREWS
- Gearbox Cover Upper Screws
- Gearbox Cover Lower Screws
- Anti-roll Bar Linkage
- Shock Absorbers
Strong Tool
REMOVING THE DIFFERENTIAL WHEN CAR IS ASSEMBLED
INSTALLING THE DIFFERENTIAL WHEN CAR IS ASSEMBLED
&
&
EXTREMELY IMPORTANT
HUB MUST BE INSERTED IN
GROOVE AND PROPERLY
PRESSED INTO BULKHEAD.
"CLICK"
TIGHTEN ALL THE SCREWS
- Gearbox Cover Upper Screws
- Gearbox Cover Lower Screws
- Anti-roll Bar Linkage
- Shock Absorbers
THE COVER MUST BE ALIGNED WITH LABYRINTH
GROOVE AND THEN PRESSED INTO PLACE
Check that left and right Diff
Height Inserts are installed in
the same orientation.
