background image

 

15 

3)

 

Outbox 

Outbox stores up to 10 outgoing text messages; when the outgoing messages exceed 10, 
the oldest message is cleared and the newest sent message is registered. When you 
choose messages stored in the list, you can view the sent messages and the caller ID to 
whom they were sent. If you want to delete text message from the Outbox, select “delete 
all” from within the outbox menu and press the menu button to delete all messages. 

 

 

5.1.3 Call Logs 

This  function  allows  the  viewing  of  incoming  and  outgoing  calls  from  individuals  only. 
Any group call, all calls are not saved. The contents are managed in the same manner as 
in the inbox and outbox of the text message. 

1)

 

Inbox 

Inbox stores up to 10 received calls; when the received calls exceed 10, the oldest call is 
cleared and the newest incoming call is registered. When a new call incomes, the caller 
ID will be displayed on the LCD screen. If you want to delete caller ID from the inbox, 
select “delete all” from within the inbox menu and press the menu button to delete all 
IDs.   

 

2)

 

Outbox 

Outbox stores up to 10 outgoing calls; when the outgoing calls exceed 10, the oldest call 
is cleared and the newest outgoing call is registered. When a new call made, the caller ID 
will be displayed on the LCD screen. If you want to delete caller ID from the Outbox, 
select “delete all” from within the outbox menu and press the menu button to delete all 
IDs.   

 

5.1.4 Call Recording 

This function is used to record the content of outgoing and incoming calls.   
Up to 63 conversations/recordings can be stored with each recording limited to 160 seconds. 
Call  recording  can  be  selected  on  the  Setting  menu.  If  you  want  to  delete  recordings,  select 
“delete all” from the “Record” on the menu. 

 

Summary of Contents for DM-4000 Series




























Reviews: